How to Make Your Own Sink Cover for More Counter Space DIY Tutorial.

This is a simple project, and really adds a lot of space. Most campers/trailers/rvs come with a cover for your sink, but some are not very useful. Mine was made of the same chipboard/formica as the counter. I couldn't even use it as a cutting board, and after a few years, being by the sink made the chipboard swell up and become 'unsightly'. Of course, if you buy a second hand camper, you might not even get one!

I decided to make a more useful, durable and attractive cutting board / sink cover myself.

How I Raised My Low Camper Sink! Added Storage Too!

THIS IS MY FAVORITE MOD EVER! I can't tell you how much I love this!! I go into the camper and just stand in front of my 'new' sink and smile!! It's so nice and much more comfortable! Plus it looks snazzy! and has new storage . . . .  

I love my camper!!! But one thing that has always been irritating is

How to Make Easy DIY PVC Awnings for Your Camper - Fully Adjustable & Removable

The large roll-out awning on the front shades most of our camper. However, there is a window at the head of the bed that seems to get a lot of HOT sun, no matter where we are parked. Or rain, it gets rain, too. I decided that there must be some way to make an awning that would work for protection, but be removable and break down for storage. Oh, and fully adjustable, that would be nice! 

No More Crappy Faucets! Plus Bonus Hidden Storage - Installing a Thermostatic Mixing Faucet in my Camper Trailer

This was written to install a thermostatic mixing faucet, but really, you could install any faucet using this method.

I decided to wait until we got home from camping to install the new faucet for the shower. You can see quite a few to choose from here (scroll down to mid-page) Some are really neat - square, or narrower than the one I got.

 I'm really glad I did! It was more complicated than I planned (isn't it always?)  For your convenience, I have posted affiliate links to the actual products I used.  Thank you for supporting this site with purchases made through links in this article. I really do appreciate it!

There are a couple issues with installing this faucet on a flat wall with flexible supply lines. The first is that the fittings that come with it are offset because it is actually designed to be installed into threaded copper pipes so it doesn't need any additional support. Since I am putting it through the side of a cabinet, I have to have a way to support it.

Table System - How to Finish the Tops of the Table Legs

You've probably seen the knock down tables I built for my camper. Oh, you didn't? Well, check it out - it is a table system that makes 2 snack tables or a dining/game table, comes apart, stores flat, takes up very little room and can be easily built with inexpensive materials! See it here!

When the dining table is up, the tops of the legs are visible. So, I thought I should finish them off a little nicer than just bare pvc. 

First I filled them with a wood dowel. This worked great, but when I made a second set, I didn't have another dowel.

I did however have a can of Durham's Water Putty.

Rolling Storage Trolley with 8' of Storage in 11" and FREE Landscape Pattern

More Found Storage - When I replaced the dinette with a storage couch, I ended up with about 11" of empty space between the couch and the bed.  I built a rolling trolly to fit there. It has about 8 feet of storage space!