How To Add a Two Compartment Sewer Hose Storage to A Camper/RV - Bonus How to Modify for Permanent 90' Fitting

If you're new to my blog, make sure you click here and check out all the tutorials & ideas I have on my blog. 

I love my little camper, but it doesn't have a bumper to store the sewer hose in. When you drain the tanks, it's bad enough to deal with the hose, without having to try to shove it into a bucket. I didn't like having it stored in the camper with the rest of our stuff, either. So I was excited to build this storage area for it. This post will show you how I built an RV sewer hose storage from a vinyl fence post that will work even if you have a permanent 90' fitting on the end!

IF YOU STORE YOURS IN YOUR BUMPER: Even when we had a trailer with a bumper, we did not store it in the bumper - the inside is metal, and rusts, and gets rough and will eventually make holes in your sewer line. So even if you have a bumper, this is a better way to store it. After making the holder, just strap it to your bumper.

I used a 5" square vinyl fence post, two fence caps, some metal strapping, screws and a piece of scrap plywood. 

How I Added a Laundry to My Camper and You Can Too!! PLUS MORE HIDDEN STORAGE!

Eight weeks on the road is going to be a lot nicer! We now have a wonderful laundry! If you can find 18"x18"x35" you can have a wonderful laundry room too!! Here's how I did it.

8 Feet of Storage in 10 1/2 Inches

Okay, there is now about 11 inches between the arm of the couch and the bed. This is a major improvement, the dinette used to be flush against the edge of the bed which meant all four corners of the mattress had walls on them. It was so horrible to make up that bed!

I designed a shelf that is 10 and a half inches wide, 24 inches deep and the height of a dining table.

UPDATE - FULL TUTORIAL HERE

The shelf fits neatly between the couch and bed, and is on wheels. I can roll it out to make changing the sheets or just making up the bed so much easier! I guess I have no more excuses.

It adds 6 linear feet of new storage for things that used to sit on top of the dinette table.  The top is actually in 2 pieces. A tray that fits down over the top of the shelf can be removed to use as a bed tray, or to carry items out to the picnic table. 

I've designed a bracket system to build onto the top shelf it will allow the tray to sit flush with the top of the shelf and create a table that is approximately 24 by 22. I'll have pictures and a tutorial up soon!

Update: We did use the table a couple times, but then my wonderful daughter-in-law gave us a Lifetime 'Personal Table' that is PERFECT! 

It adjusts in height from 22" to 28" and we can use it outside. It folds flat and stores in our tiny shower when we are on the road.  Between the 'Personal Table' and the larger adjustable table, I am a huge fan of Lifetime products. And they're made in America!! (Those two links will bring you to the info page about the products, and they are affiliate links, so I get a few pennys when you buy one - thanks LOL)

The larger table has the advantage of going from coffee-table height to counter-height! We use it outside the camper as an extra counter for preparing food or just a place to keep things off the ground. 

Now Go Play Outside!

Storing Pot and Pan Lids! And Adding Chalkboards

I've made a few simple changes to the camper already - here's an easy way to store the lids for pots & pans -

The racks are made with two uprights and